Deltec Skimmer 1000i

Product Details

• Highly efficient cylinder shape
• Safe by newly developed emergency overflow with water level indicator
• Whisper quiet through a new hollow chamber floor
• Extremely low power consumption
• Quick and easy removal of the pump
• Variable adjustable pump

Technical details

Aquarium size 600 to 1000 liters
Dimensions (LXBXH): 23.5 x 15.5 x 52 cm
DC Pump Deltec DCC 2 (24V)
Power consumption 9 - 21 watts
Air volume 900 liter per hour (max.)
For sumps with 15 to 25 cm water level

Emergency Overflow

The water level in the skimmer can be read off at the emergency overflow pipe. In addition, the

minimum and maximum markings help to optimize the water level. By the possibility to exchange the
emergency overflow pipe with the regulator pipe, the user has the possibility to decide how the pipes are arranged

The water level in the skimmer can be read off at the emergency overflow pipe. In addition, the

minimum and maximum markings help to optimize the water level. By the possibility to exchange the
emergency overflow pipe with the regulator pipe, the user has the possibility to decide how the pipes are arranged

The Deltec Skimmer 1000i is operated with the Deltec pump DCC2. This 24V DC pump can be

controlled via a ten-stage controller and can be optimally adjusted to the water level and the water load. On the (for most aquariums) optimal level 7, with only 9 – 21 watts about 900 liters of air are generated. The maximum is 450 liter per hour of air

Thanks to the ergonomic cylinder shape, the Deltec Skimmer 1000i achieves the best results with

skimming. The shape of the skimmer does not taper upwards. This allows the small air bubbles to rise unhindered, are fully saturated, and burst only in the riser of the foam pot. From there, the collected broth can be discharged via a drain hose without having to take the foam pot down.

An additional innovation of the Deltec Skimmer 1000i is the hollow chamber floor. This helps to

dampen the noise still further, whereby the already quiet Deltec Skimmer 1000i is called "whisper

quiet". In addition, the water flows back through the hollow chamber floor. The water is fed at the

lowest possible point out of the skimmer, as a result of which almost no air bubbles can flow into the

aquarium.

The regular cleaning of the pump is very easy thanks to the simple and fast dismantling of the

skimmer. Deltec Skimmer 1000i can be mounted and disassembled without tools. Our tests have

shown that the pump can be removed from the skimmer in less than 20 seconds.

The dimensions of our skimmer are chosen so that they can be placed comfortably in their filter

basin. Due to the high volume of the cylinder shape, a small base area is sufficient. You can operate

the Deltec Skimmer 1000i variably in 15cm to 25cm water depth.