All For Reef Powder - Tropic Marin

Tropic Marin All-For-Reef is a revolutionary approach to dosing, combining calcium, alkalinity, and other trace elements into a single, easy to use solution. It's no longer necessary to maintain two, three, or four solutions, or a complicated reactor. All-For-Reef is a balanced source of calcium and carbonate hardness, released through natural biological processes, along with a mix of trace elements. No mixing, no gas cylinders, no fuss.

Features :

• Complete single solution
• No byproducts (e.g. sodium chloride)
• No excess carbon dioxide
• Dosing pump ready
• No mixing required
• Doesn't alter salinity or ionic balance

Instructions :

Recipe & Directions (Per liter of All-For-Reef Solution)

• Step 1: Starting with a clean container with slightly over a 1 liter capacity, add approximately 900 mL RODI or distilled water. Room temp water is ok, but warm water will help dissolve the powder more quickly.
• Step 2: Slowly add 6 level measuring spoons (approximately 160g) of All-For-Reef Powder to the water, stirring constantly.
• Step 3: Keep stirring. It can take some time for the solution to be clear.
• Step 4: Once powder is fully dissolved, the solution is ready for dosing.

Dosing Instructions

Start with a daily dose of 5 ml of All-For-Reef per 100 liters (26 US-gal) of aquarium system volume. Increase the daily dosage – by continuous control of the alkalinity – weekly by 2.5 ml per 100 liters (26 US-gal) of aquarium system volume, until a constant carbonate hardness of 7 to 9°dH is reached.

Suggested Maximum Dose: 25 ml of All-For-Reef per 26 gallons (100 liters) of aquarium system volume.