| What Your Junior Can do right out of the Box | |
| Temperature monitoring | - A quality temperature monitoring solution that alerts you to over or under-temperature situations is a must for a successful aquarium.
- Detects Failure of Heater or Chiller even with the slightest temperature swing, provides a Instant notification
|
| pH moniter | - Monitoring pH not only allows you to tune in desirable parameter stability but also serves as an essential warning system to warn you of negative chemistry changes
- get an alert when you have a low pH, maybe the Kalkwasser is running out or you need to slow down your calcium reactor. Is pH too high? maybe a dosing pump failed and Running rouge, Save everything with real-time notifications before it has time to damage your tank.
|
| Leak Detection | oh-so-important protection for your floors, and your marriage!
Upon contact with liquid, this sensor will communicate to your Apex to send an alert or trigger other actions.
Protect your aquarium and your home |
| Optical water Sensor | - Use it as an ATO sensor with your pump
- Level sensor for Tank or Sump overfill
- ATO reservoir level sensor to alert you when it's empty
- help automate or Monitor your saltwater mixing containers
- Dosing Liquid reservoir level monitor: Notifies when it empties and the time to refill.
The optical sensor indicates the presence of water above or below the sensor location |
| Heart Beat |
Detect a power outage and be notified of the problem despite the power failure in progress.
Apex Notifies when the apex gets disconnected, in the case of power failure. It could be the most helpful feature to save your fish and Inverts. |
| Logging Your Data | - Helps you log the sensor data in the Apex Fusion
- Add in Manual log from your Manual test kits. Supports values from all major test kit brands (no calculations needed! Let the apex do it for you)
- Inter-relate all the data from recently made changes, and know what goes on in your tank even when you're asleep.
- Helps you see many parameters, Added a Co2 scrubber to see how it helps your pH,(with Trident) how your Alk is consumed, specifically at what times, etc
|
| Set Schedule Reminder | - Set Alert for your everyday tasks
- EG: Clean your pumps, set a reminder once a month to clean your pumps. Save it as a task and get Periodic notifications to do it.
- realise ITS CLEAN-UP day or Water change day - Replace the carbon - Change the UV bulb from the sterilizer
- Some tasks are planned months ahead, in a busy day schedule we forget what init for the upcoming weekend let alone months ahead.
APEX will NEVER FORGET to REMIND you
|
